33-Point Preventative Maintenance and Federal DOT Inspection SERVICES for Semi-Trailers

Minimize breakdowns and keep your trailers compliant with DCI Fleet Service’s 33-point preventative maintenance and Federal DOT inspection program. Highly-experienced technicians will check your trailer out from top-to-bottom and provide a PM report and/or a sticker upon trailer passing Federal DOT inspection.

Our 33-POINT Preventative maintenance INSPECTION includes:

  • 1. Check for Body Damage
  • 2. Check Subframe
  • 3. Check Crossmembers
  • 4. Check Floor
  • 5. Check Interior Walls and Roof
  • 6. Check and Operate Rear Door
  • 7. Check and Lube Door Hinges and Rollers
  • 8. Check Landing Gear
  • 9. Lubricate Landing Gear
  • 10. Check Springs and Hangers
  • 11. Check Torque Rods and Bushings
  • 12. Check S-Cams and Slack Adjusters
  • 13. Lube S-Cams and Slack Adjusters
  • 14. Check Brake Shoe Thickness
  • 15. Check Brake Drums (broken or worn)
  • 16. Check for Leaky Wheel Seals
  • 17. Check for Air Leaks
  • 18. Check Brake Adjustment
  • 19. Check for Bad Brake Chambers
  • 20. Drain Air Tanks
  • 21. Check Air Tank Mounts
  • 22. Check Gladhands and Seals
  • 23. Check for Rubbing Air Lines
  • 24. Check Tire Tread and Condition
  • 25. Inflate Tires (under 60 lbs.)
  • 26. Check Hub Lube Levels and for Leaks
  • 27. Check for Wheel Damage and Slippage
  • 28. Check for Loose Lugs
  • 29. Check Tandem Locks
  • 30. Check Alignment*
  • 31. Check Kingpin Area*
  • 32. Check Lights and Reflectors
  • 33. Check Placards

*Check alignment and kingpin area available at customers discretion.